Ensenior 52-Inch Smart Ceiling Fan Review: Alexa, Google, and App Control Done Right

Ensenior 52-Inch Smart Ceiling Fan Review: Alexa, Google, and App Control Done Right

Wired Living · · 5 min read

Smart ceiling fans are one of those upgrades that pay off every day — cooling, lighting, and ambiance in one fixture. The Ensenior 52-inch pulls it off without requiring a hub, a professional installer, or a premium price tag.

Here’s what you’re actually getting.

Check price on Amazon →

The basics

The Ensenior (model ZF2-52-5Y-SM) is a 52-inch five-blade ceiling fan with a built-in dimmable LED light kit. It ships in matte black and is sized for rooms between 150–400 sq ft — covering most bedrooms, living rooms, and open-plan spaces.

Control options include:

The remote means it functions as a standard fan out of the box. The smart features layer on top — not a requirement.

Lighting: 3000K to 6000K tunable white

The integrated LED is the standout spec here. Most ceiling fans with lights give you a fixed color temperature — warm white forever, or cool white forever. The Ensenior’s LED adjusts from 3000K (warm amber, good for evenings and relaxed use) all the way to 6000K (crisp daylight, useful for task lighting or workspaces).

Brightness is fully dimmable across that range, controllable from the app, voice, or remote.

For a bedroom, you’d typically set it to 3000–3500K at 30–40% brightness in the evening. For a home office, 5000–6000K at full brightness during the day. The ability to tune both variables from your phone — or just by asking Alexa — is genuinely useful, not a gimmick.

Motor: DC, reversible, 6 speeds

DC motors run quieter and more efficiently than AC motors. The Ensenior uses a DC motor with 6 fan speeds, which gives you finer control than the typical 3-speed options on basic ceiling fans.

The motor is reversible — forward (summer mode, pushes cool air down) and reverse (winter mode, pushes warm air that collects near the ceiling back down into the room). This is switched in the app or via the remote.

A DC motor at low speeds is nearly silent. That matters if this is going in a bedroom.

Setup

Installation follows standard ceiling fan wiring — hot, neutral, and ground. If you’re replacing an existing ceiling fan, this is a direct swap. If you’re adding a fan to a room with only a light fixture, the wiring is the same.

Wi-Fi setup uses the app: connect to your home 2.4GHz network, follow the prompts. Alexa and Google Home linking happens through their respective apps using the standard “discover devices” flow.

One note: like all Wi-Fi smart fans, this requires a 2.4GHz network. It won’t connect to a 5GHz band. If your router broadcasts both on the same SSID, you may need to temporarily separate them during setup.

What works well

What to know before buying

Verdict

For a 52-inch smart ceiling fan under $150, the Ensenior delivers what actually matters: quiet DC motor, tunable LED that covers warm to daylight, real 6-speed range, and voice control that works without extra hardware. The black finish is clean enough to fit in most rooms without looking out of place.

If you’re furnishing a bedroom or living room and want one fixture to handle fan, lighting, and smart home integration — this is a solid choice.

Check price on Amazon →

Wired Living is reader-supported. Links above are affiliate links — we may earn a small commission if you purchase, at no extra cost to you.

More articles